Drawn Cup Needle Roller Bearings
Drawn cup needle roller bearings with open ends or with closed end are available in open and sealed versions. Due to the thin-walled outer, drawn cup needle roller bearings have an extremely low radial section height and do not require housing bore to be hardened. They have very high load carrying capacity, are suitable for high speeds and can be easily fitted.
Machined Needle Roller Bearings
Needle roller bearings are single or double row units comprising machined outer rings with or without ribs, needle roller and cage assemblies and removable inner rings. The bearings are available in open and sealed versions.
Combined Needle Roller Bearings
Combined needle roller bearings are units comprising radial needle roller bearings with a ball or roller bearing component capable of supporting axial loads.
Axial Needle & Cylindrical Roller Bearings and Washers
Axial needle & cylindrical roller bearings are available as complete units or separate roller and cage assembles and washers (which act as raceways). They have very low axial section height, and can carry very high axial forces in one direction
Needle Roller and Cage Assemblies
Needle roller and cage assemblies are single or double row units comprising cages and needle rollers. They are used where shaft and housing bore can be hardened. They have very high load carrying capacity, extremely small radial section height, are suitable for high speeds and can be easily fitted.
Track Rollers (Yoke and Stud type)
Track rollers - also known as cam followers - are complete units comprising thick walled outer ring, roller set (caged or full complement) with or with an inner ring in the yoke type or with a machined stud in the stud type. They are designed to act as rollers, generally either travelling along a flat track or following a cam profile. They can support high radial forces.